Stainless Steel Tubing

Introduction:

Santok Steel Corporation is the most acclaimed manufacturer, exporter, distributor and supplier of industrial Stainless Steel Tubing with required test certificates. You can also Order small quantities, we will be happy to quote best price for small and large quantities & can typically deliver the Stainless Steel Tubing in minimum time frame anywhere around the globe. Our broad product range makes your individual wishes possible and also meets the extraordinary demands.

Stainless Steel Tubing specification

Tubing Size : 1/8″NB TO 30″NB IN
Tubing Schedule: SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Tubing Type : Seamless / ERW / Welded / Fabricated / LSAW Pipes
Form : Round, Square, Rectangular, Hydraulic Etc.
Length : Single Random, Double Random & Cut Length.
Tubing End : Plain End, Beveled End, Treaded.

Production according to national and international standards (e.g. ASME, ASTM, API, EN, DNV, etc.)

Origin: Europe, Japan, Korea, Taiwan

Spec. No. Title Scope
ASTM A 213 TubingASME SA 213 Tubing Seamless Ferritic Stainless Steel and Austenitic Stainless Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes. Pressure tubes, made from 16 grades of austenitic stainless steel and from 12 grades of ferritic Cr-Mo Alloy Steel.
ASTM A 249 TubingASME SA 249 Tubing Welded Austenitic Stainless Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes. Pressure tubes, made from austenitic stainless steels, (Types 304, 304H, 304L, 305, 309, 310, 316, 316H, 316L, 317, 321, 321H, 347, 347H, 348, 348H, and XM grades.)
ASTM A 268 TubingASME SA 268 Tubing Seamless and Welded Ferritic Stainless Steel Tubing for General Service. 15 grades of ferritic stainless steel tubing for general corrosion resistance and high temperature service. (Types 329, 405, 409, 410, 429, 430, 430Ti, 443, 446, XMs & others).
ASTM A 269 Tubing Seamless and Welded Austenitic Stainless Steel Tubing for General Service. 13 grades of austenitic stainless steel tubing for general corrosion-resisting and high-temperature service. (Types 304, 304L, 316, 316L, 317, 321, 347, 348 and XM grades).
ASTM A 270 Tubing Seamless and Welded Austenitic Stainless Steel Sanitary Tubing. Austenitic stainless steel tubing intended for use in the diary and food industry in sizes up to and including 4 in. in outside diameter.
ASTM A 312 TubingASME SA 312 Tubing Seamless and Welded Austenitic Stainless Steel Pipe. Austenitic stainless steel pipe intended for high temperature and general corrosive service. 22 grades are covered.
ASTM A 358 TubingASME SA 358 Tubing Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service. For corrosion and high temperature service, normally not less than 8 in. nominal diameter. Types 304, 316, 309, 310, 321, 347, 304L, 316L, 304H, 316H.
ASTM A 376  TubingASME SA 376 Tubing Seamless Austenitic Stainless Steel Pipe for High-Temp Central-Station Service. Austenitic stainless steel pipe intended for high temperature and general corrosive service. Better surface than A312 pipe.
ASTM A 409 TubingASME SA 409 Tubing Welded Large Outside Diameter Light Wall Austenitic Chromium-Nickel Alloy Steel Pipe for Corrosive or High Temperature Service. Nominal diameter 14-30 in. in Schedules 5S and l0S. Types 304, 309, 310, 316, 317, 321, 347, 348, 304L, 316L.
ASTM A 450 TubingASME SA 450 Tubing General requirements for Alloy Steel Tubes. Common requirements for ASTM tubular specifications.
ASTM A 511 Tubing Seamless Stainless Steel Mechanical Tubing. 27 grades are covered for mechanical applications. Primarily round tubing.
ASTM A 530 TubingASME SA 530 Tubing General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Pipe. Common requirements for ASTM pipe specifications as listed.
ASTM A 554 Tubing Welded Stainless Steel Mechanical Tubing. Nineteen grades are covered for mechanical applications. Rounds, squares, rectangles, and special shapes are included.
ASTM A 632 Tubing Seamless and Welded Austenitic Stainless Steel Tubing for General Service. Small Diameter. 9 grades of austenitic stainless steel tubing for general corrosion-resisting and high-temperature service.
AMS 556 Tubing Steel Tubing, Corrosion and Heat Resistant 18 Cr; 11 Ni; (Cb + Ta) (SAE 30347) Hydraulic. Annealed type 321 hydraulic line tubing. Type 1-Seamless Type 2-Welded & Drawn
AMS 5557 Tubing Steel Tubing, Corrosion and Heat Resistant 18 Cr; 11 Ni; Ti (SAE 30321)Hydraulic Annealed type 347 hydraulic line tubing. Type 1-Seamless Type 2-Welded & Drawn
AMS 5558 Tubing Steel Tubing, Welded, Corrosion and Heat Resistant 18 Cr; 11 Ni, (Cb + Ta)(SAE 30348) Thin Wall. High pressure ducting, wall thickness 2% of O.D. or less. Weld bead controlled, X-ray.
AMS 5559 Tubing Steel Tubing, Welded, Corrosion and Heat Resistant 18 Cr, 10 Ni, Ti, (SAE 30321) Thin Wall. High pressure ducting, wall thickness 2% of O.D. or less. Weld bead controlled, X-ray.
AMS 5560 Tubing Steel Tubing, Seamless Corrosion Resistant 19 Cr; 9 Ni (SAE 30304). Annealed type 304 aircraft hydraulic fine tubing. (Not subject to high pressure). Structural.
AMS 5561 Tubing Steel Tubing, Welded and Drawn Corrosion Resistant 21 Cr; 6 Ni; 9 Mn High Pressure Hydraulic. For parts and assemblies such as fluid lines subject to high pressure and requiring corrosion resistance. 1/8 - 1/4 Hard.
AMS 5562 Tubing Steel Tubing, Seamless Corrosion Resistant 21 Cr; 6 Ni; 9 Mn Annealed. Parts and assemblies requiring both corrosion and heat resistance, and having higher strength than 18-8 types.
AMS 5565 Tubing Steel Tubing, Welded, Corrosion Resistant 19 Cr; 6 Ni (SAE 30304). Annealed type 304 aircraft hydraulic line tubing. (Not subject to high pressure), Structural.
AMS 5566 Tubing Steel Tubing, Seamless or Welded Corrosion Resistant 19 Cr; 10 N (SAE 30304) High Pressure Hydraulic Cold drawn type 304, high pressure, aircraft hydraulic line tubing. 1/8 hard.Type 1óSeamlessType 2óWelded & Drawn
AMS 5567 Tubing Steel Tubing, Seamless or Welded Corrosion Resistant 19Cr; 10 Ni (SAE 30304) Hydraulic, Solution Treated. Fluid lines subject to medium high pressures requiring corrosion resistance. Annealed.(1) Seamless (2) Welded & Drawn
AMS 5570 Tubing Steel Tubing, Seamless Corrosion and Heat Resistant 18 Cr; 10 Ni; Ti (SAE 30321). Annealed Structural. Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication. Requiring oxidation resistance up to approximately 1500?F, but useful at that temperature only when stresses are low.
AMS 5571 Tubing Steel Tubing, Seamless Corrosion and Heat Resistant 18 Cr; 11 Ni; (Cb + Ta) (SAE 30347). Annealed Structural. Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication.
AMS 5572 Tubing Steel Tubing, Seamless Corrosion and Heat Resistant 25 Cr; 20 Ni (SAE 30310). Annealed Structural. Parts and assemblies requiring both corrosion and heat resistance.
AMS 5573 Tubing Seamless Type 316 Annealed Structural Parts & assemblies requirinq,,both corrosion and heat resistance up to 1600DegF.
AMS 5574 Tubing Seamless Type 309S Annealed Structural Parts & assemblies requiring both corrosion and heat resistance up to 2000DegF, especially welded assemblies.
AMS 5575 Tubing Steel Tubing, Seamless Corrosion and Heat Resistant 18 Cr; 11 Ni; (Gb + Ta) (SAE 30347). Annealed Structural. Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication. Requiring oxidation resistance up to approximately 1500?F, but useful at that temperature only when stresses are low.
AMS 5576 Tubing Steel Tubing. Welded, Corrosion and Heat Resistant 18 Cr; 10 Ni; Ti (SAE 30321). Annealed Structural. Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication.
AMS 5577 Tubing Steel Tubing, Welded, Corrosion and Heat Resistant 25 Cr; 20 Ni; (SAE 30310). Annealed Structural. Parts and assemblies requiring both corrosion and heat resistance especially when welded during fabrication.
AMS 5639 Tubing Seamless Type 304 Cold Finished Mechanical Tube Rockwell 90B max Hardness Corrosion Embrittlement Capability
AMS 5645 Tubing Seamless Type 321
AMS 5546 Tubing Seamless Type 347
AMS 5647 Tubing Seamless Type 304L
AMS 5648 Tubing Seamless Type 316 Cold Finished Mechanical Tube Rockwell 90B max Hardness
MIL-T-5695 Tubing Tubing, Steel, Corrosion Resistant, (304) Cold Drawn (1/2 or 1/4 Hard) Smls or W&D. Intended for use in the fabrication of aircraft structural parts requiring a high degree of resistance to corrosion.
MIL-T-6737 Tubing(T 321) Tubing, Steel, Corrosion and Heat Resistant (18-8 Stabilized), Welded.Annealed. Type 321 and 347 tubing intended for use in the manufactured exhaust-stacks, manifolds, blast tubes, ring collectors and similar applications where a weldable corrosion and heat resisting steel is required or for use at 8000 – 1500DegF.
MIL-T-6845 Tubing(T304) Tubing, Steel, Corrosion Resistant (304) Aerospace Vehicle Hydraulic System. 1/8 Hard, Seamless, Welded & Drawn. Intended for use in high pressure hydraulic and pneumatic systems in which corrosion resistant materials are required.
MIL-T-8504 Tubing(T 304) Tubing, Steel, Corrosion Resistant (18-8) Annealed, Aircraft Hydraulic System. Seamless, Welded. Intended for use in high pressure hydraulic and pneumatic systems in which corrosion resistant materials are required.
MIL-T-8506 Tubing(T 304) Tubing, Steel, Corrosion Resistant, (304) Annealed, Seamless, Welded. Intended for use in the fabrication of aircraft parts requiring a high degree of resistance to corrosion. Not to be used in high pressure hydraulic control systems.
MILT 8606 Tubing(T 304L)(T 321)(T 347) Tubing, Steal, Corrosion Resistant (18-8 Stabilized). Annealed. Seamless, Welded & Drawn. Intended for use in applications which require a high degree of resistance to corrosion or to temperatures in the range of 800?F-1500DegF. or in applications which involve welding.
MlL-T-8808 Tubing(T 321)(T 347) Tubing, Steel, Corrosion Resistant (l8-8 Stabilized), Aircraft Hydraulic Quality. Annealed, Seamless, Welded & Drawn. Intended for use in high pressure hydraulic and pneumatic systems where corrosion and heat resistance are required and in which welding or brazing may be involved during fabrication.
MIL-T4973 Tubing(T 304L)(T 316L)(T 321)(T 347) Tubing, Steel, Corrosion Resistant, Aerospace Vehicle Hydraulic System. 1/8Hard. Seamless, Welded & Drawn. Intended for use in high pressure hydraulic and pneumatic systems where corrosion and heat resistance are required and in which welding or brazing may be involved during fabrication.
MIL-P-1144 Tubing(T 304) (T 304L)(T 316) (T 316L)(T 321) (T 347) Pipe, Stainless Steel, (Corrosion Resisting). Seamless or Welded. Annealed. Pipe is intended for high-temperature and hydraulic br other pressure service under general corrosive conditions.

We can produce according to Your Required Specification

Stainless Steel Tubing certificates:

ISO 9001:2008 Certified Company
We can provide EN 10204 as per 3.1/3.2 TC

Stainless Steel Tubing uses & application:

We supply Stainless Steel Tubing to Oil & Gas, Refineries, Fertilizers, Heat-Exchangers, Paper & Pulp, Pharmaceuticals, Chemicals, Water Treatment, Dairy, Sugar & Food Processing, Construction, Mining, Shipbuilding, Offshore, Defence, Ports, Railway, Nuclear Power, Power Plant, Cement, Government Org., Engineering Co., Oil Mills, and other industrial projects.

Stainless Steel Tubing packing, Shipping & delivery time:

3 Weeks + Sailing Time

Stainless Steel Tubing packing (Ready to ship)

Stainless Steel Tubing packing (Ready to ship)

Stainless Steel Tubing packing (Ready to ship)

Stainless Steel Tubing packing (Ready to ship)

Packing details:

PVC packing, carton packing, or as customer request wooden case.

Stainless Steel Tubing have to arrive safely, quickly and without damages at their destination in any part of the world. Packing is also an essential part of quality assurance.

Offer Stainless Steel Tubing best price:
Available Stainless Steel Tubing Steel Materials:

ASTM A269 Stainless Steel Tubing
ASTM A106 Carbon Steel Tubing
ASTM A53 Carbon Steel Tubing
ASTM B163 Nickel 200 Tubing
ASTM B163 Nickel 201 Tubing
ASTM B165 Monel 400 Tubing
ASTM B164 Monel Tubing
ASTM B127 Monel Tubing
ASTM B163 Inconel Tubing
ASTM B775 Inconel Tubing

ASTM B163 Inconel 600 Tubing
ASTM B775 Inconel 600 Tubing
ASTM B167 Inconel 601 Tubing
ASTM B775 Inconel 601 Tubing
ASTM B444 Inconel 625 Tubing
ASTM B704 Inconel 625 Tubing
ASTM B729 Alloy 20 Tubing
ASTM B468 Alloy 20 Tubing
ASTM B163 Incoloy Tubing
ASTM B163 Inconel 800 Tubing

ASTM B163 Incoloy 800 Tubing
ASTM B515 Incoloy 800 Tubing
ASTM B515 Inconel 800 Tubing
ASTM B163 Incoloy 800H Tubing
ASTM B515 Incoloy 800H Tubing
ASTM B163 Incoloy 800HT Tubing
ASTM B515 Incoloy 800HT Tubing
ASTM B423 Incoloy 825 Tubing
ASTM B705 Incoloy 825 Tubing
ASTM B622 Hastelloy Tubing

ASTM B626 Hastelloy Tubing
ASTM B622 Hastelloy C276 Tubing
ASTM B626 Hastelloy C276 Tubing
ASTM B622 Hastelloy C22 Tubing
ASTM B626 Hastelloy C22 Tubing
ASTM B622 Hastelloy B2 Tubing
ASTM B626 Hastelloy B2 Tubing
ASTM A249 254 SMO Tubing
ASTM A249 254 SMO Tubing
ASTM A574 Alloy Steel Tubing

Stainless Steel Tubing Advanced Manufacturing Process:
Stainless Steel Tubing we export to:

Bahrain, Brazil, Chile, Egypt, India, Iran, Iraq, Kuwait, Lebanon, Middle East, Mexico, Nigeria, Oman, Saudi Arabia, South Africa, South America, Qatar, Turkey, United States, UAE, Venezuela, Yemen & around the globe.

Other types of Pipes, Tubes & Tubing